Mcc500-16IO1: Tataiso ea hau ho lijule tse phahameng haholo
2025-04-02 165

MCC500-16IORO1 ke module oa hau o tsitsitseng oa nyekotso o tsoang ho ixys, o etselitsoeng likopo tse matla tse kang ho laola koloi, lihlapi tsa matla le lisebelisoa tsa matla.Ka bokhoni ba ho sebetsana le 1600 v le 500 a, e fana ka ts'ebetso e tšepahalang maemong a thata.Le ha module ona ha e sa le tlhahiso, e ntse e fumaneha bakeng sa ho reka, ho netefatsa ts'ehetso bakeng sa lits'ebetso tse teng.Sengoliloeng sena se tla akaretsa likarolo, likopo le mefuta e meng ea Mcc500-166Io1.

Catalog

MCC500-16IO1.jpg

Mcc500-16IO1 Overview

The MCC500-16IO1 ke module oa hau o matla oa tocherisd oa Throristor oa tsoa ho ixys, e tsamaisang likopo tsa matla a phahameng moo ho hlokahalang ho chenchaang le ho lekaneng.Mojule ka mong o entsoe ka bana ba babeli tokisetsong e tloaelehileng ea cakhode, e etselitsoeng ho tsamaisa moroalo o sebetsang oa motlakase ka nepo.E na le lintlha tse pheta-phetoang tsa Peak Off-State Voltage (VDrm) ea 1600 v mme e ka sebetsana le boemo bo tloaelehileng ba mmuso (iTav) ea 500 A ka mocheso oa 89 ° C.Sesebelisoa se khona ho mamella setulong se sa ratoang hona joale (iTSM) ea lilemo tse 16.5 Ka, e loketseng lits'ebetso e hlokang matla le ho tšepahala.

Le ha MCC500-16Io1 e tšoailoe e le ea Sebeliseng, e lula e le teng webosaeteng ea rona, e boloka tšehetso ea litšupiso kapa litlhoko tse khethehileng tsa moralo.Bakeng sa ba nang le thahasello ea ho hlahloba mojule oa thuto ena kapa ho reka, ka kopo ikopanye le rona kajeno ho boloka li hlokoa.

Lisebelisoa tsa MCC500-16IO1

Banyatsa ba Kopaneng - ba ne ba ithathatsa bana ba babeli ba yuniti e le 'ngoe, ba sebelisa moralo o tloaelehileng oa cakhode.

Hands Hand Voltage - E ka khona ho laola ho fihla ho 1600 ntle le ho khopatsa.

Li-carries tse boima - E ts'ehetsa li-amps tse 500 tse tsoelang pele mochesong o phahameng oa mocheso.

Tšireletso e buoang - E ka sebetsana le litlolo tse khutšoane ho fihlela li-amp tse fetang 16,500 bakeng sa li-milliseconds.

Ho Theha ka Matla - Tloo ka Case e le chasi e kholo ea chasi (wc-500) bakeng sa ho kenya habonolo le taolo e ntle ea mocheso.

Ho bonolo ho tsosa - E sebetsa ka lipontšo tsa hete ho fihlela ho 3 volts le limilimithara tse 300.

Lula ha ho hlokahala - E hloka feela sehokelo feela sa ho lula u khanna nakong ea ts'ebetso.

E hahiloeng bakeng sa maemo a thata - E tšepahala ka matla a phahameng le libakeng tse phahameng tsa mocheso.

Litšireletso tsa Mcc500-16IO1

Taolo ea koloi ea AC le DC - E sebelisitsoe ka lebelo la lebelo le fapaneng le li-stoper tse bonolo tsa baitami ba indasteri.

Barekisi ba Matla - E loketseng bakeng sa li-Rectifiers tse laoloang le li-sforefer tse laoloang ke Mohato.

Lisebelisoa tsa Welding - e fana ka pherekano e tšepahalang le ea hona joale ka li-weders tse boima.

Li-charger tsa betri - E loketse litsamaiso tsa betri tse matla tsa indasteri e matla.

Litsamaiso tsa Matla a Hlollang - E thusa ho laola matla ts'ebetsong e kholo ea ho futhumatsa ea motlakase.

Lisebelisoa tse sa senyeheng tsa matla (UPS) - E ts'ehetsa ka botšepehi ho silafatsa lits'ebetso tsa matla a backup.

Lisebelisoa tsa Matla a Mapolesa a Liindasteri - E sebelisitsoe ho litsamaiso tsa matla a phahameng tsa hona joale, tse phahameng tsa voltage bakeng sa lifeme tsa hau le li-actions.

Mefuta e meng ea Mcc500-16I1

• asmcc50000-16-io1

Skkt-570-16-e

MCC312-16Io1

Mcc500-16Io1 Litlhaloso tsa Motlakase

Paramente Letshwao Boleng Maemo
Ho pheta-pheta boemo ba Peak-State voltage VDrm / VRMM 1600 v Tj = 125 ° C
Ka karolelano ho-State hajoale IT (av) 500 a TC = 89 ° C
RMS For-State hajoale IT (rms) 1294 a TC = 55 ° C
Brege (e sa pheta) ho-State hajoale ITSM 16.5 KA t = 10 ms, halofo ea halofo ea tj = 25 ° C
Kajeno ke boleng ba ho hloela Ke 'nèt 1358 Ka²re t = 10 ms
Peak Gate Trigger ea morao-rao IGt Ma Tj = 25 ° C
Peak Gate Triggy Voltage VGt 3.0 v Tj = 25 ° C
Ho ts'oara hona joale IH < 1 A Tj = 25 ° C
DV / DT (DV / DT)cr 1000 v / μs Tj = 125 ° C
ONA STAP Voltage VTM 1.04 v (e tloaelehileng), 1.20 v (max) IT = 1575 a, tj = 25 ° C

Mcc500-166I1 litšobotsi tse futhumetseng le tse thata

Paramente Letshwao Boleng Maemo / Lintlha
Khanyetso ea Teaction e Tloaelehileng (ka motjeko o mong oa hau) Rthjc 0.062 k / w -
Case-to-Futerink ea futhumatsang e futhumatsang (module) RThck 0.02 k / W Ka mafura a hloalang
Mocheso o phahameng oa Junction Tj -40 ° C ho 125 ° C -
Motsoako oa mocheso oa polokelo TSGG -40 ° C ho ea 150 ° C -
Torque ea ho hloa - litekete tse ka sehloohong - 6 nm M8 screw ka washer ea selemo
Ho hloa toropo ea ho hola - screws screws - 6 nm M6 Screw le Washer ea selemo
Boima - Approx.1.5 kg -
Dimensions (L "r × w × H) - Approx.150 mm × 60 mm × 52 mm Ho kenyeletsoa le matlo le matlo
Mokhoa oa ho futhumatsa - Heatenk (e qobelloang kapa ea tlhaho) Ho itšetleha ka moralo oa marotholi

Mcc500-16IO1, ASMCCC500-16-Io1 le MCC312-16I1 papiso

Tšobotsi
MCC500-16IO1 Asmcc500-16-io1 MCC312-16Io1
Moetsi Ixys E le Moqapi oa ATGI ™ (e mong.) Ixys
Karolelano ea hona joale (iTav) 500 a 500 a 312 a
POHOK Voltage (VDrm) 1600 v 1600 v 1600 v
Burge hona joale (iTSM) 16.5 KA 16.5 KA (EBENOLE) 8.3 Ka
Tlhophiso Tancheristor e kopaneng, cashode e tloaelehileng Tlhophiso e tšoanang Tancheristor e kopaneng, cashode e tloaelehileng
Mofuta oa sephutheloana Wc-500 Wc-500 (e tsamaisang) WC-mofuta (e nyane)
Boemo O qetile E fumaneha (Drop-in-Dropment) E sebetsang
Kopo e loketseng Ts'ebeliso ea Liindasteri tse matla haholo Sebaka sa MCC500-166I1 Litšireletso tse fapaneng tsa Metsi

Mehlasi le mathata a mcc500-16Io1

Melemo:

- E ts'ehetsa ho fihlela ho 500 a, ho etsa hore e be e loketseng tšebeliso ea indasteri ea boima ba lichelete.

- E nka libaka tsa 16.5 Ka ho Eketsehileng ea Ts'ebetso ea Litsamaiso tsa Li-Spikes tsa Matla.

- E lekantsoe bakeng sa 1600 v, e loketseng lits'ebetso tse phahameng tsa voltage.

- e nolofatsa moralo oa potoloho le ho boloka sebaka sa boto.

- Ho bonolo ho kenya ka ts'ebetso e ntle ea mafura ka maoto a bolotsana.

- E hahiloe ho etsa ha ho na le mathata a futhumetseng le a motlakase.

Litsietsi:

- Ha e sa le tlhahisong ea Ixys, e etsang hore ho ithutelloa e lekanyelitsoeng ho li-stock kapa tsa bobeli.

- E hloka ho fihla ho isa ho 300 m ho tjeka, e leng e ka lekang ho feta lipotoloho tsa Gate drive.

- E kanna ea ba bulkier ho feta Newer, meralo e mengata e nang le lipapatso tse nang le litekanyetso tse tšoanang.

- Khomishene e hlophisitsoeng e ka se lumellane le meralo ea mophetisi kapa ea sejoale-joale.

Mcc500-166I1 e le leloko la ho taka

MCC500-16IO1 outline drawing.jpg

Setšoantšo sa sehokelo sa MCC50000-166IO1 se fana ka leseli la mantlha ka likarolo tsa 'mele, tlhophiso ea ho ntse e eketseha, le sesebelisoa sa Deat.Pono e kaholimo ho ntša lintlha tse tharo tsa bohlokoa tse ngotsoeng 1, 2, eo hangata e amanang le kamano ea motlakase bakeng sa mojule oa matla.Sebaka se pakeng tsa litlolo se bonahala ka ho hlaka, ka sebaka se bohareng sa lik'hilograma tse 112 lipakeng tsa likhutlo tsa 1 le 3.Masole ana a itsoamela ho li-bolts tsa M10, a netefatsa hore na o tsitsitse.

Pono e lehlakoreng e bontša bophahamo ba mojule, bo ka bang 62 mm, 'me bo tiisa hore na li-test khang ea motlakase ka holimo bakeng sa khokahano ea motlakase.Setšoantšo se boetse se bontša bolelele ba 150 mm le tumellano ea bophahamo, e thusang ka ho ikopanya le ho ikopanya le ho ikopanya le ho ikopanya le ho khomarela.

Maikutlo a Qetellong a fana ka ponahatso ea taolo, e ngotsoeng k le g, hangata e sebelisoa bakeng sa li-sisita tsa li-gate le tsa ho laola li-module.Hammoho, maikutlo ana a ka tiisa ka tieo ho kopanya mcc500-166611-16 ka boqapi ba eona ka maoto bakeng sa litlhoko tsa eona tsa matsoho le maemo.

MCC500-166IO1 ka hare ea Sebopeho sa Poland

MCC500-16IO1 internal circuit diagram.jpg

Setšoantšo se ka hare sa potoloho ea Mcc500-166 mabapi le sekhoebo sa eona e le mojule oa li-dual-Diode.Liseto tse 1 le 2 li emela lihokela tsa likokoana-hloko tse peli tsa matla, ha a ntse a le terminal 3 ke moo ho arolelanoang.Sebopeho sena se tloaelehileng se lumella hona joale ho phalla ho tloha terminal 3 ho li-terminal 3 ho li-parminal 3 le 2 ka likopo tse holimo.Litefiso tse nyane tse behiloeng (4, 5, 6, le 7) li hokahane kapa li thusa ho lekola kapa tsa snbber.

Setšoantšo se boetse se bontša hore li-terminals 6 le 7 li hokela bohareng bo pakeng tsa likotlo tse peli, ho supa lintlha tsa li-arrmal kapa likulong.Sethala sena se tloaelehile libakeng tsa indasteri, moo modumo e sebelisoang ho li-schersers tse matla, kapa li-motor drives.Sebopeho se ka hare se totobatsa mokhoa o phahameng oa ho kopanya likotoana tse peli tse nang le matla a mabeli a sephutheloana se fumanehang.

Moetsi oa Mcc500-16IO1

IFYS Corporation e ne e le moetsi ea tsebahalang oa li-semicoctors tse amanang hantle le lichifi, li ikamahanya le lisosa tsa moea tsa liriki tsa indasteri, lipalangoang le bareki.E thehiloe ka 1983 le ha e le hlooho e kholo ea California, IFYS e ile ea fana ka botumo ba ho ntlafatsa ts'ebeliso ea matla ho fetola tsamaiso le matla a ho feto-fetoha.Khamphani e ne e tsepamisitsoe mekhahlelo e tšepahalang, e nang le mafolofolo e sebelisoang ka har'a koloi ea makoloi, basomi ba letsatsi, litsamaiso tsa Planet, Lisebelisoa tse ling tse phahameng haholo.Ka 2018, Ixys e fumanoe ka lilateFFuse, Inc.

Sephetho

MCC500-16Io1 ke khetho e matla le e tšepahalang bakeng sa likopo tse matla tse phahameng, leha e se e se e felile.E ntse e tsoela pele ho sebeletsa tsamaisong e hlokang hore e be e fihletse pele kapa ntlafatso.Ha mekhoa e melelele e ncha e fumaneha, mojule ona o ntse o fana ka molemo o moholo.Ikopanye le Rona Kajeno ho fumana tharollo e molemohali ea litlhoko tsa hau.

Datasheet PDF

Mcc500-16Io1 Datieiets:

1.MCC80000E111.PDF
MABAPI LE RONA Khotsofalo ea bareki nako le nako.Lithahasello tsa ka bobeli le lithahasello tse tloaelehileng. ARIAT Tech o thehile ka nako e telele le ea tšebelisano e matla ea tšebelisano le bahlahisi le baemeli ba bangata. "Bokaholimo bohle bo tla hlahlojoa ntle le mathata le litsebi tsa ho feta
Teko ea ts'ebetso.Lihlahisoa tse phahameng ka ho fetisisa tsa theko e phahameng le ts'ebeletso e ntle ka ho fetisisa ke boitlamo ba rona ba ka ho sa feleng.

LIPOTSO TSE BOTSOANG HANGATA [FAQ]

1. Ke ntho efe e ntseng e eketseha ea Mcc500-16I1?

Module o na le sephutheloana sa Chassis-Mount (WC-500) e nang le likotlo tse ntseng li eketseha bakeng sa li-bolts tsa M10

2.

Mojubu o na le bana ba babeli ka tokisetso e tloaelehileng ea lijana, e lumella taolo ea moroalo ka motlakase ka ho laoloa.

3. Na Mcc50000-166 sebetsana le libaka tse phahameng tsa mocheso?

E, module ona o etselitsoe ho tsamaisa tikolohong e nang le mocheso o mongata oa -40 oa Junction o 125 ° C ho isa 125 ° C ho ea 125 ° C ho ea 125

4. Mokhoa ofe oa ho pholile oa MCC500-16I1 o hloka?

Mojule o hloka mocheso oa ho futhumala, e mong le e mong o qobelloang kapa oa tlhaho, ho latela moralo o futhumetseng oa sisteri ea sistimi.

5. Morero oa li-warminals tsa taolo k le g ho Mcc500-16IO1?

Litšila tsa K le G li sebelisoa bakeng sa li-ig tsa Gate le tsa taolo ea lihlahisoa tsa IGBT, ho lumella bakeng sa ho beha lintho tse tsosang le ho lekola.

Email: Info@ariat-tech.comHK TEL: +00 852-30501966ADD: Rm 2703 27F Ho King Comm Center 2-16,
Fa Yuen St MongKok Kowloon, Hong Kong.